diff --git a/entrypoint.sh b/entrypoint.sh
index b4b26aef..6cac6e9e 100644
--- a/entrypoint.sh
+++ b/entrypoint.sh
@@ -1,54 +1,65 @@
 #!/bin/sh
 
-printf "\nGetting public IP address..."
+# Obtaining your original IP address to use for the healthcheck
+printf "\nGetting non VPN public IP address..."
 export INITIAL_IP=$(wget -qqO- 'https://duckduckgo.com/?q=what+is+my+ip' | grep -ow 'Your IP address is [0-9.]*[0-9]' | grep -ow '[0-9][0-9.]*')
-printf "DONE\nChanging DNS to localhost..."
+printf "$INITIAL_IP"
+
+# Setting up cloudflare DNS 1.1.1.1 over TLS
+printf "\nChanging DNS to localhost..."
 echo "nameserver 127.0.0.1" > /etc/resolv.conf
 echo "options ndots:0" >> /etc/resolv.conf
-printf "DONE\nStarting Unbound to connect to Cloudflare DNS 1.1.1.1 at its TLS endpoint..."
+printf "DONE"
+printf "\nLaunching Unbound daemon to connect to Cloudflare DNS 1.1.1.1 at its TLS endpoint..."
 unbound
-printf "DONE\nSetting firewall for killswitch purposes...\n  Detecting local subnet..."
+printf "DONE"
+printf "\nSetting firewall for killswitch purposes..."
+printf "\n * Detecting local subnet..."
 SUBNET=$(ip route show default | tail -n 1 | awk '// {print $1}')
-printf "$SUBNET\n  Detecting IP addresses corresponding to $REGION.privateinternetaccess.com..."
-VPNIPS=$(nslookup $REGION.privateinternetaccess.com localhost | tail -n +5 | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')
+printf "$SUBNET"
+printf "\n * Detecting parameters to be used for region $REGION, protocol $PROTOCOL and encryption $ENCRYPTION..."
+CONNECTIONSTRING=$(grep -i "/openvpn-$PROTOCOL-$ENCRYPTION/$REGION.ovpn" -e 'privateinternetaccess.com')
+PORT=$(echo $CONNECTIONSTRING | cut -d' ' -f3)
+PIADOMAIN=$(echo $CONNECTIONSTRING | cut -d' ' -f2)
+printf "\n   * Port: $PORT"
+printf "\n   * Domain: $PIADOMAIN"
+printf "\n     * Detecting IP addresses corresponding to $PIADOMAIN..."
+VPNIPS=$(nslookup $PIADOMAIN localhost | tail -n +5 | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')
 for ip in $VPNIPS
 do
-	printf "\n    $ip"
+	printf "\n        $ip"
 done
-printf "\n  Deleting all iptables rules..."
+printf "\n * Deleting all iptables rules..."
 iptables --flush
 iptables --delete-chain
 iptables -t nat --flush
 iptables -t nat --delete-chain
 iptables -P OUTPUT DROP
-printf "DONE\n  Adding rules to accept local loopback traffic..."
+printf "DONE"
+printf "\n * Adding rules to accept local loopback traffic..."
 iptables -A INPUT -j ACCEPT -i lo
 iptables -A OUTPUT -j ACCEPT -o lo
-printf "DONE\n  Adding rules to accept traffic of subnet $SUBNET..."
+printf "DONE"
+printf "\n * Adding rules to accept traffic of subnet $SUBNET..."
 #iptables -A INPUT --src $SUBNET -j ACCEPT -i eth0
 iptables -A OUTPUT -d $SUBNET -j ACCEPT -o eth0
-printf "DONE\n  Determining port to be used with PIA..."
-if [ "$PROTOCOL-$ENCRYPTION" == "tcp-normal" ]; then
-	PORT=502
-elif [ "$PROTOCOL-$ENCRYPTION" == "tcp-strong" ]; then
-	PORT=501
-elif [ "$PROTOCOL-$ENCRYPTION" == "udp-normal" ]; then
-	PORT=1198
-elif [ "$PROTOCOL-$ENCRYPTION" == "udp-strong" ]; then
-	PORT=1197
-fi
-printf "$PROTOCOL $PORT"
+printf "DONE"
 for ip in $VPNIPS
 do
-	printf "\n  Adding rules to accept traffic with VPN IP address $ip on port $PROTOCOL $PORT..."
+	printf "\n * Adding rules to accept traffic with $ip on port $PROTOCOL $PORT..."
 	iptables -A OUTPUT -j ACCEPT -d $ip -o eth0 -p $PROTOCOL -m $PROTOCOL --dport $PORT
 	iptables -A INPUT -j ACCEPT -s $ip -i eth0 -p $PROTOCOL -m $PROTOCOL --sport $PORT
 	printf "DONE"
 done
-printf "\n  Adding rules to accept traffic going through the tun device..."
+printf "\n * Adding rules to accept traffic going through the tun device..."
 iptables -A INPUT -j ACCEPT -i tun0
 iptables -A OUTPUT -j ACCEPT -o tun0
-printf "DONE\nStarting OpenVPN using $PROTOCOL with $ENCRYPTION encryption\n"
+printf "DONE"
+printf "\n * Starting OpenVPN using the following parameters:"
+printf "\n   * Domain: $PIADOMAIN"
+printf "\n   * Port: $PORT"
+printf "\n   * Protocol: $PROTOCOL"
+printf "\n   * Encryption: $ENCRYPTION"
 cd /openvpn-$PROTOCOL-$ENCRYPTION
 openvpn --config "$REGION.ovpn" --auth-user-pass /auth.conf
-printf "\n\nExiting..."
\ No newline at end of file
+printf "\nExiting...\n\n"
\ No newline at end of file