The target files are created in /openvpn/target

- More resilience to failure
- Less verbose
- Works with start/stop

Dockerfile

@@ -33,12 +33,11 @@ RUN apk add -q --progress --no-cache --update openvpn wget ca-certificates iptab
             https://www.privateinternetaccess.com/openvpn/openvpn-strong.zip \
             https://www.privateinternetaccess.com/openvpn/openvpn-tcp.zip \
             https://www.privateinternetaccess.com/openvpn/openvpn-strong-tcp.zip && \
-    mkdir /openvpn && \
+    mkdir -p /openvpn/target && \
     unzip -q openvpn.zip -d /openvpn/udp-normal && \
     unzip -q openvpn-strong.zip -d /openvpn/udp-strong && \
     unzip -q openvpn-tcp.zip -d /openvpn/tcp-normal && \
     unzip -q openvpn-strong-tcp.zip -d /openvpn/tcp-strong && \
-    find /openvpn -type f -name "*.ovpn" -exec sed -i '/resolv-retry/d' {} + && \
     apk del -q --progress --purge unzip && \
     rm -rf /*.zip /var/cache/apk/* /etc/unbound/unbound.conf && \
     adduser nonrootuser -D -H --uid 1000

README.md

@@ -2,8 +2,6 @@
 
 *Lightweight VPN client to tunnel to private internet access servers*
 
-**WARNING: auth.conf is now replaced by the environment variables `USER` and `PASSWORD`, please update your configuration**
-
 [![PIA Docker OpenVPN](https://github.com/qdm12/private-internet-access-docker/raw/master/readme/title.png)](https://hub.docker.com/r/qmcgaw/private-internet-access/)
 
 [![Build Status](https://travis-ci.org/qdm12/private-internet-access-docker.svg?branch=master)](https://travis-ci.org/qdm12/private-internet-access-docker)

entrypoint.sh

@@ -70,6 +70,9 @@ done
 #####################################################
 # Writes to protected file and remove USER, PASSWORD
 #####################################################
+if [ -f /auth.conf ]; then
+  printf "/auth.conf already exists\n"
+else
   printf "Writing USER and PASSWORD to protected file /auth.conf..."
   echo "$USER" > /auth.conf
   exitOnError $?
@@ -84,6 +87,7 @@ printf "Clearing environment variables USER and PASSWORD..."
   unset -v USER
   unset -v PASSWORD
   printf "DONE\n"
+fi
 
 ############################################
 # CHECK FOR TUN DEVICE
@@ -98,6 +102,7 @@ printf "TUN device OK\n"
 # BLOCKING MALICIOUS HOSTNAMES AND IPs WITH UNBOUND
 ############################################
 printf "Malicious hostnames and ips blocking is $BLOCK_MALICIOUS\n"
+rm -f /etc/unbound/blocks-malicious.conf
 if [ "$BLOCK_MALICIOUS" = "on" ]; then
   tar -xjf /etc/unbound/blocks-malicious.bz2 -C /etc/unbound/
   printf "$(cat /etc/unbound/blocks-malicious.conf | grep "local-zone" | wc -l ) malicious hostnames and $(cat /etc/unbound/blocks-malicious.conf | grep "private-address" | wc -l) malicious IP addresses blacklisted\n"
@@ -120,14 +125,9 @@ exitOnError $?
 printf "DONE\n"
 
 ############################################
-# FIREWALL
+# Reading chosen OpenVPN configuration
 ############################################
-printf "Setting firewall for killswitch purposes...\n"
+printf "Reading configuration for region $REGION, protocol $PROTOCOL and encryption $ENCRYPTION...\n"
-printf " * Detecting local subnet..."
-SUBNET=$(ip route show default | tail -n 1 | cut -d" " -f 1)
-exitOnError $?
-printf "$SUBNET\n"
-printf " * Reading parameters to be used for region $REGION, protocol $PROTOCOL and encryption $ENCRYPTION..."
 CONNECTIONSTRING=$(grep -i "/openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn" -e 'privateinternetaccess.com')
 exitOnError $?
 PORT=$(echo $CONNECTIONSTRING | cut -d' ' -f3)
@@ -140,25 +140,59 @@ if [ "$PIADOMAIN" = "" ]; then
   printf "Domain not found in /openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn\n"
   exit 1
 fi
-sed -i "/$CONNECTIONSTRING/d" "/openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn"
-exitOnError $? "Can't delete remote connection string in /openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn"
-printf "DONE\n"
 printf " * Port: $PORT\n"
 printf " * Domain: $PIADOMAIN\n"
-printf "     * Detecting IP addresses corresponding to $PIADOMAIN..."
+printf "Detecting IP addresses corresponding to $PIADOMAIN...\n"
 VPNIPS=$(nslookup $PIADOMAIN localhost | tail -n +5 | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')
 exitOnError $?
-printf "DONE\n"
-for ip in $VPNIPS; do printf "        $ip\n"; done
-printf " * Adding IP addresses of $PIADOMAIN to /openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn...\n"
 for ip in $VPNIPS; do
-  if [ "$(grep "remote $ip $PORT" "/openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn")" != "" ]; then
+  printf "   $ip\n";
-    printf "     remote $ip $PORT (already present)\n"
-  else
-    printf "     remote $ip $PORT\n"
-    echo "remote $ip $PORT" >> "/openvpn/$PROTOCOL-$ENCRYPTION/$REGION.ovpn"
-  fi
 done
+
+############################################
+# Writing target OpenVPN files
+############################################
+TARGET_PATH="/openvpn/target"
+printf "Creating target OpenVPN files in $TARGET_PATH..."
+rm -rf $TARGET_PATH/*
+cd "/openvpn/$PROTOCOL-$ENCRYPTION"
+cp -f *.crt "$TARGET_PATH"
+exitOnError $? "Cannot copy crt file to $TARGET_PATH"
+cp -f *.pem "$TARGET_PATH"
+exitOnError $? "Cannot copy pem file to $TARGET_PATH"
+cp -f "$REGION.ovpn" "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot copy $REGION.ovpn file to $TARGET_PATH"
+sed -i "/$CONNECTIONSTRING/d" "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot delete '$CONNECTIONSTRING' from $TARGET_PATH/config.ovpn"
+sed -i '/resolv-retry/d' "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot delete 'resolv-retry' from $TARGET_PATH/config.ovpn"
+for ip in $VPNIPS; do
+  echo "remote $ip $PORT" >> "$TARGET_PATH/config.ovpn"
+  exitOnError $? "Cannot add 'remote $ip $PORT' to $TARGET_PATH/config.ovpn"
+done
+# Uses the username/password from this file to get the token from PIA
+echo "auth-user-pass /auth.conf" >> "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot add 'auth-user-pass /auth.conf' to $TARGET_PATH/config.ovpn"
+# Reconnects automatically on failure
+echo "auth-retry nointeract" >> "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot add 'auth-retry nointeract' to $TARGET_PATH/config.ovpn"
+# Prevents auth_failed infinite loops - make it interact? Remove persist-tun? nobind?
+echo "pull-filter ignore \"auth-token\"" >> "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot add 'pull-filter ignore \"auth-token\"' to $TARGET_PATH/config.ovpn"
+# Runs openvpn without root, as nonrootuser
+echo "user nonrootuser" >> "$TARGET_PATH/config.ovpn"
+exitOnError $? "Cannot add 'user nonrootuser' to $TARGET_PATH/config.ovpn"
+# Note: TUN device re-opening will restart the container due to permissions
+printf "DONE\n"
+
+############################################
+# FIREWALL
+############################################
+printf "Setting firewall for killswitch purposes...\n"
+printf " * Detecting local subnet..."
+SUBNET=$(ip route show default | tail -n 1 | cut -d" " -f 1)
+exitOnError $?
+printf "$SUBNET\n"
 printf " * Deleting all iptables rules..."
 iptables --flush
 exitOnError $?
@@ -205,19 +239,6 @@ iptables -A OUTPUT -o tun0 -j ACCEPT
 exitOnError $?
 printf "DONE\n"
 
-############################################
-# Additional OpenVPN settings
-############################################
-cd "/openvpn/$PROTOCOL-$ENCRYPTION"
-# Uses the username/password from this file to get the token from PIA
-[ "$(grep "auth-user-pass /auth.conf" "$REGION.ovpn")" != "" ] || echo "auth-user-pass /auth.conf" >> "$REGION.ovpn"
-# Reconnects automatically on failure
-[ "$(grep "auth-retry nointeract" "$REGION.ovpn")" != "" ] || echo "auth-retry nointeract" >> "$REGION.ovpn"
-# Prevents auth_failed infinite loops - make it interact? Remove persist-tun? nobind?
-[ "$(grep "pull-filter ignore \"auth-token\"" "$REGION.ovpn")" != "" ] || echo "pull-filter ignore \"auth-token\"" >> "$REGION.ovpn"
-# Runs openvpn without root, as nonrootuser
-[ "$(grep "user nonrootuser" "$REGION.ovpn")" != "" ] || echo "user nonrootuser" >> "$REGION.ovpn"
-
 ############################################
 # OPENVPN LAUNCH
 ############################################
@@ -227,9 +248,9 @@ printf " * Encryption: $ENCRYPTION\n"
 printf " * Protocol: $PROTOCOL\n"
 printf " * Port: $PORT\n"
 printf " * Initial VPN IP address: $(echo "$VPNIPS" | head -n 1)\n\n"
-
+cd "$TARGET_PATH"
-openvpn --config "$REGION.ovpn"
+openvpn --config config.ovpn
 status=$?
 printf "\n =========================================\n"
 printf " OpenVPN exit with status $status\n"
-printf " =========================================\n"
+printf " =========================================\n\n"